Delta 36 725 Or Ridgid R4512?
Best Stability
Delta 36 725
Best cutting performance
Ridgid
This table saw is stable thanks to its sturdy wheelbase. It’s easy to transport and use.
This table saw cuts at an amazing speed and makes deep bevel cuts. The steel rip fence on the rail is easy to adjust, making it more precise.
Best Stability
Delta 36 725
This table saw is stable thanks to its sturdy wheelbase. It’s easy to transport and use.
Best cutting performance
Ridgid
This table saw cuts at an amazing speed and makes deep bevel cuts. The steel rip fence on the rail is easy to adjust, making it more precise.
Features Of Ridgid R45412 And Delta 36 725
Build And Size
These table saw sizes are similar to the most compact table saws on the market. Table saws have a similar cast iron table to reduce vibrations, as do other top-performing table saws below 300.
Ridgid R4512 and Delta 36 725 have built-in accessory slots that allow you to install additional fences, if needed. They also have an integrated dust port system to collect sawdust.
The sturdy wheelbase on both table saws improves balance and portability. The table saw can be easily moved.
Their weight is the most important difference. Ridgid weighs 121 kilograms, while the Delta table saw is approximately 91 kilograms. Delta 36 725, being lighter and easier to transport from one jobsite to another than Ridgid, is therefore more suitable.
Winner: Delta 36 725
Cutting Performance: Delta 36 725 & Ridgid RR4512
Both table saws were impressive in cutting, according to our experts. Their 25 cm carbide-tipped blades cut thick workpieces quickly and efficiently.
The RidgidR4512 power tool can cut wood up to 8 cm thick at 90 degrees and 6 cm at 45 degrees bevel. It has a maximum rip capacity of 76 cm for the blades right, and 38 cm for the blades left. This allows for greater accuracy in cutting.
The Delta 36 725, on the other hand guarantees a depth cut to 2-inch thick wood at 45° and 3-inch at 90°. To maximize precision cutting, it also has a maximum rip capacity of 76 cm for the blades to the right and 38 cm for the blades to the left.
Both saws can accept dadopowerful tablesaw blades up to 13/41cm in width and a maximum depth of 1 inch. To run the dado insert, however, you will need a dado insert.
Both saws have a well-designed fence system and rail system. However, our team found that Delta’s fence system and rail system is superior to Ridgid’s. The rails were easy to align and adjust.
R4512 aluminum rails might warp making it difficult to adjust the fence and reach the maximum rip capability. Warping is minimal because the Delta table saws rails are made of steel.
To improve cutting accuracy, the miter gauges on both saws were effective stops.
Winner: Delta 36 725
Delta 36 725 Speed And Ridgid R4512 Speed
The Delta 36 725 is capable of cutting any material or stubborn stock at a speed of 3,600 RPM.
The Ridgid R4512 can cut various sizes of stock at 3,450 RPM. This is 150 RPM more than the Delta 36 725. You can change the speed of both table saws to your liking. Lower blade speeds are possible for soft metals or plywoods. This table saw is also a top choice for beginners.
Winner: Delta 36 725
Power Source
AC powered table saws can be connected to an AC power source. Both table saw motors can be wired to 120V for maximum cutting efficiency.
Both table saws have an on/off switch that works exactly like the Dewalt DWE7491RS power switch, but Ridgid’s switch is smaller and more difficult to reach. This aspect is not significantly different between Delta 36 725 and Ridgid R4512.
Safety Features
Safety is an essential aspect of table saws. Safety features on table saws will ensure that the user is safe during operation.
Ridgid R4512 and Delta 36 725 have safety features such as blade guards and riving knives, as well anti-kickback systems that minimize work hazards and kickbacks.
You should read the table saw injuries to learn how to properly use tables saws. Next, read!
Motor And Drive Configuration
The motors of both table saws are belt-driven and 13 amps. They can cut through thick stock in your table saw projects, metals, or other materials.
Delta 36 725 And Ridgid R4512 Setup
The Delta 36 725 tablesaw was easy to assemble by our experts. It is comparable in price and quality to other table saws on the market. Ridgid was a little more difficult to set up, and it wasn’t the easiest.
The power cord for Ridgids was too short to reach its power source. It was also difficult to adjust the rip fence.
Winner: Delta 36 725
Delta 36 725, Ridgid R4512 Price
Both table saws have unique features, such as the Dewalt DWE7491RS and Hitachi C10RJ saws. However, they are affordable. They are more expensive than their competition.
These budget-friendly tablesaws won’t cost you a fortune. These table saws are well-priced and feature great value.
Warranty
Ridgid table saws and Delta table saws are covered by a five-year limited warranty, while ShopSeries RK7240.1 has only a two-year limited warranty. Both saws can be trusted and are reliable, as this further confirms their durability.
Overall Winner: Delta 36 725
Although both products have great features and efficient cuts, our team concluded that Delta 36 725 is more performant.
Our Delta 36 725 vs Ridgid R4512 comparison has shown that the former is more precise at cutting and handling light-duty to medium-duty jobs.
Additionally, the wheelbase allows for easy movement and is affordable.
We are often confused about the circular and table saws. Here is our comparison between them. Next!
